Loading…
You're signed in. Before continuing, please confirm you are 21 or older and buying for laboratory research use only (RUO). Products are not for human or veterinary consumption and have not been evaluated by the FDA.
You must be 21 years of age or older to view our products. Access has been blocked on this device.
Welcome to Crux Peptides
Use this code at checkout. Applies to your whole order.
Lyophilized (freeze-dried) peptides keep longest when they stay sealed, cold, dry and dark. Most labs keep them at -20 °C (-4 °F) for long-term storage and at 2 to 8 °C (36 to 46 °F) for a few weeks. A peptide in solution breaks down much faster, so dissolve only what you need and freeze the rest in single-use aliquots.
| Form | Short term | Long term | Main risks |
|---|---|---|---|
| Lyophilized powder, sealed vial | 2 to 8 °C (36 to 46 °F) for up to a few weeks | -20 °C (-4 °F) or colder, sealed and dark | Moisture, light, opening the vial while it is still cold |
| Peptide in solution | 2 to 8 °C (36 to 46 °F) for a few days | -20 °C (-4 °F) or -80 °C (-112 °F), frozen in single-use aliquots | Repeated freezing and thawing, microbial growth, oxidation |
| Bacteriostatic or sterile water, unopened | Controlled room temperature, usually 20 to 25 °C (68 to 77 °F) | Same; follow the label | Damaged seals, cloudiness, entering a single-use vial twice |
Lyophilized peptides tolerate room temperature for the few days they spend in transit, but they should go into cold storage as soon as the package is opened. Before you put each vial away, check that the name, size and lot number on the label match your packing slip, and compare them with the certificate in our COA Library. Write down the date received and where you stored it. If anything is missing or doesn’t match, keep the vial sealed and contact us before using it. Order status is on the Track Order page.
Keep each peptide in its original sealed vial until you need it. A standard laboratory freezer at -20 °C (-4 °F) suits long-term storage. Frost-free freezers warm up briefly during each defrost cycle, so a manual-defrost freezer, or a spot away from the door in a frost-free one, gives steadier temperatures.
Moisture is the main enemy of a lyophilized peptide. Many peptides absorb water from the air, so store vials in a sealed container with desiccant and keep them out of direct light. Sequences that contain cysteine, methionine or tryptophan oxidize more easily, and some labs purge opened vials with nitrogen or argon before resealing them.
Let a cold vial reach room temperature before you open it, ideally inside a desiccator. Opening it cold makes water from the air condense on the powder. Work quickly, take out what you need, reseal the vial and return it to cold storage.
Dissolve the peptide in the solvent its documentation recommends. If you are choosing between waters, our guide to bacteriostatic water vs sterile water explains the difference. Many suppliers suggest a sterile, slightly acidic buffer, around pH 5 to 6, for better stability in solution.
Divide the solution into single-use aliquots right after you make it, so each portion is thawed only once. Store the aliquots frozen at -20 °C (-4 °F) or -80 °C (-112 °F). A solution kept in the refrigerator at 2 to 8 °C (36 to 46 °F) is best used within a few days. Label every aliquot with the compound, concentration, solvent, date and lot number.
Powder that has turned sticky, clumped or changed color has usually taken on moisture. A solution that turns cloudy or shows particles may have aggregated or picked up contamination. These signs are only a warning, though. Analytical testing such as HPLC and mass spectrometry is the only way to confirm purity and identity.
For each vial, record the lot number from its certificate of analysis, the date received, where it is stored, and the date it was opened or dissolved. If a result looks wrong later, these records let you trace it back to a specific lot.
It depends on the sequence and on storage. Kept sealed, dry and dark at -20 °C (-4 °F), many lyophilized peptides stay stable for a long time, often years. Check the compound’s documentation for its specific guidance.
Only for short periods, such as the days spent in shipping. For anything longer, move them to 2 to 8 °C (36 to 46 °F) or -20 °C (-4 °F).
Usually a few days, and less for sequences prone to oxidation or breakdown. For longer storage, freeze the solution in single-use aliquots at -20 °C (-4 °F) or colder.
Each freeze-thaw cycle can break down or clump a peptide, and each thaw lets condensation in. Single-use aliquots avoid both problems.
Unopened vials are usually kept at controlled room temperature, 20 to 25 °C (68 to 77 °F). After the first entry, date the vial and follow the label’s discard time. Our comparison guide covers this in more detail, and bacteriostatic water is available in 3 mL and 10 mL vials.
Crux Peptides products are for laboratory and in-vitro research use only. They are not for human or veterinary use. This guide covers general laboratory storage and handling. Always follow the storage conditions on the product label and its certificate of analysis.
We use cookies to measure our website and the performance of our ads. You can accept or reject them; the site works either way. Privacy policy